Check out the V2 Durability 'Crash Test' video on the videos page

Pocket Combat Wing
Discontinued

As Reviewed By RCMicroFlight

CNC Cut All EPP 20 inch span mini combat wing

Designed by Justin Ammon

All PCW kits are version 2 and include a molded motor mount and launching/landing skid.

The Pocket Combat Wing (PCW), is a miniature combat type wing. Although the PCW is designed to be flown in the same manor as larger combat wings, its size allows it to be flown virtually anywhere. The PCW is made of CNC cut EPP foam that allows it to withstand extreme abuse.

However, the PCW is not intended to be a trainer for novice pilots unless assisted by competent, experienced help.

With roll rates approaching 3 per second and speeds as high as 30-40mph, the PCW can be a handful. A sharp eye and quick reflexes are a prerequisite, but that is what makes the PCW a blast to fly anywhere and anytime. With 2 1000+mA LiPo cells installed, the PCW can achieve flight times of up to one hour.

Discontinued

Image above shows typical component placement

Build Instructions:
Follow this link to a discussion thread that covers the step-by-step construction of this kit.  The thread contains photos covering almost all steps in the build and flight of this kit.
The build is of the P-250, but is the same as the PCW except for the motor mount and motor.

Complete Combo Packages Below for
One-Stop Shopping!!!

Specifications

Wingspan: 20 inches
Weight: 5 to 6oz
Motor: Not included- GWS EDP-50DD (stock)
Materials: EPP Foam, Plastic, Balsa, Plywood
Channels: 3 required with elevon mixing and throttle.

Construction materials: EPP foam, Carbon fiber, Balsa, Coroplast, and molded plastic.

KIT Contents:

1-set CNC cut all EPP wing cores
1-set elevons
1-set coroplast wing tips
1-carbon spar
1-hardware package (includes: 2 micro control horns, 2 EZ pushrod connectors, push-rod material)
1-molded motor mount
1-molded launching/landing skid

Material Needed:

Motor (GWS EDP-50xc stock or 12mm brushless)
Glue (shoe goo, goop, 5-minute epoxy, Elmer's Probond, etc.)
Covering material (Econocote, Ultracote, colored tape, etc,)
3M-77 Spray (new or old formula)
1-micro receiver (GWS or equivalent)
2-micro servos (GWS Pico standard or equivalent)
Batteries (2 Lithium Polymer cells or 7-8 NiMH 2/3 AAA cells)
2-amp speed control min (stock) or 9-amp for brushless.
Transmitter with built in elevon mixing
Basic hobby tools

Click here to see the PCW in action

Caution: Large File Size 12.9MB

Combo and Package Deals

Brushless Ultra Pocket Pack
Incredible gift combo pack!!! 
The Ultra Pocket Pack is everything needed to complete a Pocket Combat Wing except a transmitter with elevon mixing and adhesive.  Everything else needed to build and fly a PCW is included.
After placing an order for this package, you will receive an email asking for transmitter brand and channel number as well as color choices for the 2 rolls of tape.

LiPo batteries are to be handled with care.  Misuse or improper charging may result in personal injury or property damage.  EdgeRC is not and can not be responsible for damages related to the use of LiPo batteries. 

What you get.
1-PCW kit
2-GWS Pico+ Std. servos
1-Berg 4L Receiver and xtal
1-CC Thunderbird 9 Brushless ESC
1-Feigao 5100kv Brushless motor.
1-1200mA 2 cell (7.4V) Etec LiPo battery pack
1-Apache 1-2 cell LiPo charger
2-Rolls of colored covering tape. 8 color choices
This kit requires a minimum of 2-5 hours to complete.
 

Discontinued
 
 

Brushless
Super Pocket Pack
Incredible gift combo pack!!! 
The Super Pocket Pack is identical to the Ultra Pocket Pack listed above but does not include the Apache LiPo charger.  This combo package is for the hobbyist that already has an appropriate charging system for LiPo batteries.  NiCad and NiMH chargers will NOT work to charge LiPo batteries.
After placing an order for this package, you will receive an email asking for transmitter brand and channel number as well as color choices for the 2 rolls of tape.

LiPo batteries are to be handled with care.  Misuse or improper charging may result in personal injury or property damage.  EdgeRC is not and can not be responsible for damages related to the use of LiPo batteries. 

What you get.
1-PCW kit
2-GWS Pico+ Std. servos
1-Berg 4L Receiver and xtal
1-CC Thunderbird 9 Brushless ESC
1-Feigao 5100kv Brushless motor.
1-1200mA 2 cell (7.4V) Etec LiPo battery pack
2-Rolls of colored covering tape. 8 color choices
This kit requires a minimum of 2-5 hours to complete.

Discontinued

If the combo package that you desire is not listed, please feel free to contact us.
We are happy to accommodate any combo you may wish to receive. 

Pocket Combat Wing RTF
Now BRUSHLESS!!
(Ready to Fly)
This is the single most complete and truly RTF Package you can get.  It is perfect for the R/C pilot that has little or no time to build for himself.
You get a professionally built, and flight tested, Pocket Combat Wing that has been setup for maximum performance.  You simply open the box, turn on the transmitter, and plug in the preinstalled battery and you are ready to fly.  There is truly no other items need to operate this amazing airplane!!!  This airplane is not intended for a beginner.

Discontinued

Already have an original PCW built and flying?
Order a V2 upgrade kit to enjoy the cleaner lines and greater durability of the PCW-V2.  This kit includes a molded motor mount and launching/landing skid as well as a new set of all EPP CNC cut wing cores and a new carbon fiber spar.  You can reuse the hardware, elevons, wingtips, motor and all of your electronics with this upgrade kit.

PCW
core kit
$19.99+S&H
$4.05 first item $1.50 each additional

Do you have an original PCW kit that is unbuilt, or need replacement mounts and skids?
Would you like to build it with the new version molded motor mount and skid?  Or, would you like to give a more finished look to your mini wing from another manufacture?
This is the package that you will need.  It includes a molded motor mount and molded skids. 

PCW
molded parts
$3.99+S&H
$4.05 first item, no additional shipping charges for additional packages