Pocket Combat Twin (PCT)

Patent Pending
CNC Cut All EPP 24 inch span mini combat wing

Designed by Justin Ammon

Weighing in at an amazing 6.5oz and having a span of only 24 inches, the PCT can be taken, and flown almost anywhere. Powered by two (2) supplied EDP-50XC motors the PCW can reach speeds of more than 50mph and a roll rate that is almost uncountable.

The all EPP, CNC cut airframe has the additional reinforcement of a 13 inch carbon fiber spar. This combination makes the PCW one of the most damage resistant aircraft on the market.

The Pocket Combat wing is intended for experienced modelers, and as such should be built and flown by those with the appropriate skill level. If this is your first aircraft, please ask experienced modelers for assistance while learning to fly.

Price:  Discontinued

Click the picture to see a video of the PCT in action flying in a soccer field!!!

Caution: 13MB video, but worth the download.

This kit includes two motors and four props!

Specifications

Wingspan: 24 inches
Weight: 6-1/2oz
Motor: 2 GWS EDP-50XC (included with 4 props)
Materials: EPP Foam, Plastic, Balsa, Plywood
Channels: 3 required with elevon mixing and throttle.

Construction materials: EPP foam, Carbon fiber, Balsa, Coroplast, and light ply.

KIT Contents:

1-set CNC cut all EPP wing cores with center sections.
1-set elevons
1-set coroplast wing tips
1-carbon spar
1-hardware package (includes: 2 micro control horns, 2 EZ pushrod connectors, push-rod material)
2-center wing rib/motor support
2-GWS EDP-50 motors and 4 props
1-instruction set

Material Needed:

Glue (shoe goo, goop, 5-minute epoxy, Elmer's Probond, etc.)
Covering material (Econocote, Ultracote, colored tape, etc,)
3M-77 Spray (new or old formula)
1-micro receiver (GWS or equivalent)
2-micro servos (GWS Pico standard or equivalent)
Batteries (2 Lithium Polymer (1000+mA) cells or 7-8 NiMH 2/3 AAA cells)
5-amp speed control min.
Transmitter with built in elevon mixing
Basic hobby tools