NEW
OverLord Combo Packages are now available near the bottom of this page!

OverLord

Patent Pending
All EPP 48 inch span combat wing
Designed by Justin Ammon

Price:  Discontinued
2 New Videos
This video is of the OverLord built from the "Builders Kit" listed below.
Click Here Video 1
(a small version of this video is viewable on the "Videos" page)

This video is the Builders Kit PLUS the High Performance Upgrade listed below.
Click Here Video 2
This video was shot simply for testing and is only of a few high speed passes. The OverLord in the video was built with a Hacker Outrunner motor at the request of the customer.

Dangerous in combat, and perfect for beginners. The OverLord by EdgeRC Inc. is one of the most universal electric wings available.

Made of super-tough CNC cut EPP foam and reinforced with one of the strongest carbon fiber spars in the industry, the OverLord is nearly indestructible.

Super maneuverable, yet very stable, the OverLord excels as a sport/combat/trainer aircraft. Fly the OverLord in the toughest combat contests with little danger of being knocked out of the sky by the enemy, and then, hand the controls off to a beginner and watch them succeed in Radio Control without the fear of destroying an expensive trainer.

Experienced pilots will find the responsiveness of the OverLord very pleasing. Finding maneuvers crisp, clean yet very smooth and controlled.

Sport Pilots will find the smooth handling a source of relaxation, yet can tear up the sky with wild aerobatics at the drop of a hat.

Beginners will enjoy the ability to fly at very slow speed and the ultra quick recovery from mistakes and loss of control. 

Specifications

Wing Span: 48 inches
Weight: 22-28oz typical (High-performance versions may be heavier)
Motor: S400 6V minimum
Radio: 3 channel with elevon mixing minimum
ESC: 15Amp minimum
Materials: EPP foam, balsa, carbon fiber, coroplast, aluminum

KIT Contents:

1-Set of all EPP CNC cut wing cores with precut spar
and battery slot.
1-28 inch carbon spar
1-CNC cut aluminum motor mount
1-Set of precut and sanded elevons
1-set of precut 2mm Coro wing tips
1-hardware package (includes pushrods, metal clevises,
control horns, and motor screws)
1-instruction set

Material Needed:

Glue-epoxy, shoe goo, goop or welder, or polyurethane glue
Fiberglass reinforced strapping tape (1 inch)
3M Super 77 spray adhesive or equivalent
Covering material of your choice (econocote, ultracote, colored packaging tape, etc.)
Radio system with elevon/V-tail mixing, receiver,
HS-81 servos or equivalent
Motor-(speed 400 min.), props (Gunther or zagi)
Speed control-15amp min.
Batteries-8 cell AA or 8-10 cell 2/3 A or 8 cell 4/5 A
Basic hobby tools (exacto knife, small screwdrivers, etc.)