|
KIT Contents:
1-set CNC cut all EPP wing cores with center sections.
1-set elevons
1-set coroplast wing tips
1-carbon spar
1-hardware package (includes: 2 micro control horns, 2 EZ pushrod
connectors, push-rod material)
1-molded landing skid
1-molded motor mount
1-Johnson-250 motor with 2 props
1-instruction set
|
Material Needed:
Glue (Low-Temperature Hot Glue or
shoe goo, goop, etc.)
Covering material (Econocote, Ultracote, colored tape, etc,)
3M-77 Spray (new or old formula)
1-micro receiver (GWS or equivalent)
2-micro servos (GWS Pico standard or equivalent)
Batteries (2 LiPo cells~1200mA or 7-8 NiMH 2/3 AAA cells)
8-Amp Electronic Speed Control w/BEC
Transmitter with built in elevon mixing (dual rates recommended)
Basic
hobby tools |
|
Replacement Parts |
|
Already have a
Pocket-250 built and flying?
No matter how tough a plane is, eventually they wear out.
Get a replacement core kit that includes the CNC cut foam cores, a carbon
spar, a molded motor mount and a launching/landing skid to build a fresh
wing, or to try your own designs and ideas. |
Pocket-250
core kit
$19.99+S&H
$4.05 first item $1.50 each additional |
|
Replacement Motor Mount
and Landing Skid
Use this molded motor mount or landing skid or both on your
Pocket-250 or other wing to replace broken or worn parts, or to simply add a
motor to a plane that otherwise did not have a motor. |
Pocket-250
molded parts
$3.99+S&H
$4.05 first item, no additional shipping charges
for additional packages
|
|
|
Combo and Package Deals
|
|
|
Pocket-250
Ultra Pocket Pack
Incredible gift
combo pack!!!
The Ultra Pocket Pack is everything needed to complete a
Pocket Combat Wing except a transmitter with elevon mixing and
adhesive. Everything else needed to build and fly a PCW is
included.
After placing an order for
this package, you will receive an email asking for transmitter brand and
channel number as well as color choices for the 2 rolls of tape.
LiPo batteries are to
be handled with care. Misuse or improper charging may result in
personal injury or property damage. EdgeRC is not and can not be
responsible for damages related to the use of LiPo batteries.
|
What you get.
1- Pocket-250 kit
2-GWS Pico+ Std. servos
1-Plantraco DSP4-SC receiver with built-in 10Amp ESC and xtal
1-1200mA 2 cell (7.4V) Etec LiPo battery pack
1-Apache 1-2 cell LiPo charger
2-Rolls of colored covering tape. 8 color choices
This kit requires a minimum of 2-5 hours to complete.
Only
No Longer available
Please see the PCW page for a Brushless option.
|
|
|
Pocket-250
Super Pocket Pack
Incredible gift
combo pack!!!
The Super Pocket Pack is identical
to the Ultra Pocket Pack listed above but
does not include
the Apache LiPo charger. This combo package is for the hobbyist
that already has an appropriate charging system for LiPo
batteries. NiCad and NiMH chargers will NOT work to charge LiPo
batteries.
After placing an order for
this package, you will receive an email asking for transmitter brand and
channel number as well as color choices for the 2 rolls of tape.
LiPo batteries are to
be handled with care. Misuse or improper charging may result in
personal injury or property damage. EdgeRC is not and can not be
responsible for damages related to the use of LiPo batteries.
|
What you get.
1- Pocket-250 kit
2-GWS Pico+ Std. servos
1-Plantraco DSP4-SC receiver with built-in 10Amp ESC and xtal
1-1200mA 2 cell (7.4V) Etec LiPo battery pack
2-Rolls of colored covering tape. 8 color choices
This kit requires a minimum of 2-5 hours to complete.
No Longer available
Please see the PCW page for a Brushless option.
|
|
|
Pocket-250
RTF
(Ready to Fly)
This is the single most complete and truly RTF Package you can
get. It is perfect for the R/C pilot that has little or no time to
build for himself.
You get a professionally built, and flight tested, Pocket-250
that has been setup for maximum performance. You simply open the
box, turn on the transmitter, and plug in the preinstalled battery and
you are ready to fly. There is truly no
other items need to operate this amazing airplane!!! This airplane is not intended for a
beginner.
|
This package includes:
1- pre-built and test flown Pocket-250 with all hardware installed.
1- Ultra high quality 5 channel "Hitec" brand computer radio
(Flash 5x) with rechargeable batteries. Not a cheap 3 channel
radio that will be out-grown in short order, but a high quality computer
radio that will offer many years of use on many other projects as well. ($190.00 value)
1- Apache LiPo battery charger.
All equipment is brand new. Shipping is free on this item
|
No Longer available
Please see the PCW page for a Brushless option.
|
email: Support@EdgeRC.com
For Questions call:
785-525-6274
|
