|
"Justin,
you did it! This MiniBOP ROCKS."
Alan
Newman-Tempe, AZ |
|
|
MiniBOP
30-inch
span 280-powered EPP parkflyer with attitude.
Designed by Justin Ammon |
|
The Mini Bird of
Prey (MiniBOP)
ONLY
$64.95 + S&H
Discontinued |
Introducing the MiniBOP. The MiniBOP
is one of the most intriguing parkflyer available. The performance
envelope ranges from mild to insane, all on the stock airframe. Use the
recommended stock motor/battery setup for fun and lively 280 sized
parkflyer performance. But, replace that stock motor and battery system
with a high-powered brushless motor system like the direct drive Hacker
B20-26L and 3 Thunder Power 2100mA LiPo battery cells, and hang on for a
ride that will astonish you and all of your flying buddies.
Properly built, the MiniBOP is a joy
to fly with traits that made its big brother, The "Bird of
Prey" such a hit. Gentle stalls, and responsive low speed
handling, combined with the ability to generate amazing speed for a 280
powered 30-inch wing make the MiniBOP unique. The ability to upgrade
performance without upgrading the airframe makes the MiniBOP able to
meet the needs and desires of most any pilot.
No one will ever mistake your MiniBOP for another aircraft, thanks to
the unusual and aggressive forward swept wing design. This forward swept
design is what allows the MiniBOP to perform in a wide flight envelope
effectively.
This kit is not intended for beginners without the direct aid and
supervision of an experienced R/C modeler and pilot. Please read,
understand and follow all instructions contained in this kit. Failure to
complete this kit properly and operate it in a safe manor may result in
personal injury and/or property damage. Please operate this and all
other R/C aircraft away from others in accordance with the AMA safety
code.
Please take the time to become an AMA member and enjoy the benefits
and peace of mind that come with membership. More information on the AMA
can be found at www.modelaircraft.org |
|
|
Specifications
Type: Park-Flyer/
High-Performance
Wing Span:
30 inches
Weight:
11-13 oz
Motor: 280 class brushed electric
up to Hacker B20-26L brushless.
Batteries: 8 cell AAA or 5/4 AAA
NiMH up to 3 cell ThunderPower 2100mA LiPo for brushless.
Materials: CNC cut EPP foam,
Balsa, Coroplast, Plastic, and Carbon Fiber.
|
|
Kit Contents
1-CNC cut all EPP wing core set with
spar-slots
1-Preshaped all EPP fuselage with precut spar-slot, battery and
receiver/ESC compartments.
2-Carbon fiber spars.
1-Molded canopy
1-Precut and sanded Elevon set.
1-Precut Coroplast vertical stabilizer
1-Motor mount system with zip-ties
1-Hardware package (includes: pushrods, clevises and control horns.
1-Instruction set
2-Balsa stabilizer spacers
1-280 motor set with props and adapters (optional) |
Materials Needed
1-Glue. Your choice, Low-temp hot glue, Polyurethane glue, Shoe
goo/All purpose welder or Epoxy. Hot glue is fastest, and works well.
1-Hot knife or sharp hobby knife.
1-Roll clear packaging tape or hinge tape
1-Roll ¾-1 inch fiberglass strapping tape
1-Micro receiver. Berg Micro Stamp recommended.
2-Sub-Micro servos. 10 gram or smaller, 13oz of torque minimum.
1-Minimum 7 Amp ESC for stock setup.
1-Transmitter with elevon mixing 3 channel minimum (dual rates/Expo
preferred)
1-Battery pack. 8-cell NiMH brick pack approx. 4oz or 3 cell Thunder
Power 2100mA LiPo pack for brushless.
Miscellaneous hobby tools and items including screwdrivers, hook and
loop fasteners (Velcro) Small weights, pliers, etc. |
email: Support@EdgeRC.com
For Questions call:
785-525-6274
|
